SLED215F <br /> Fixed <br /> 110º Ø84mm - Image 2

SLED215F <br /> Fixed <br /> 110º Ø84mm - Image 3

SLED215F <br /> Fixed <br /> 110º Ø84mm - Image 4

SLED215F <br /> Fixed <br /> 110º Ø84mm - Image 5

SLED215F <br /> Fixed <br /> 110º Ø84mm - Image 6

SLED215F
Fixed
110º Ø84mm

general purpose flood lighting
selectable CCT 2700K / 3000K / 4000K
CRI 90
pure convex diffusion
trim matches ZELA range
IP65 front
constant current

Convex Diffusion – the sLED DOME with pure convex diffusion delivers quality, uniform lighting even when dimmed.

Pure CCT – each of the three CCT options is produced with a unique set of LED chips. Pure CCT gives you consistent light colour from every luminaire.

Selectable CCT – before installation – via the switch on the back of the housing – choose from 2700K in bedrooms to minimise blue light and maximise sleep; 3000K for living rooms, or 4000K for office or laundry lighting.

Product specifications below are given for 3000K.

Insulation coverable (IC-F / IC-4)

Define Your Product

Select the options below to define your product
Please select one option from each line.
Options will remain to enable product selection.
All lines must be selected to show a product.

Light Level and Beam Generator

Usage instructions

Use the below graphic to assist in visualising how the selected luminaire will effect your design space

Select the options to the left to define your product
Select the room height in the text box at bottom of graphic
Move the slider on the left of the graphic to position the desired lux level height, i.e. for a desk at 700mm and a room height of 2400mm move the slider to 2400-700 = 1700mm
Select the options on the left and watch the lux levels change depending on diffuser, beam angle, CCT and driver
Try various combinations of the above to achieve the desired lux levels and beam spread
When happy with the luminaire selected, copy and paste the full product code from beneath the graphic into your specification